![](https://motoinstruction.ru/img/yamaha/16/122026.jpg)
1. Oil level warning light "
![](https://motoinstruction.ru/img/yamaha/16/122027.jpg)
2. Neutral signal lamp "N"
3. Turn signal lamp "
![](https://motoinstruction.ru/img/yamaha/16/122028.jpg)
4. Engine fault warning light "
![](https://motoinstruction.ru/img/yamaha/16/122029.jpg)
5. High beam warning light "
![](https://motoinstruction.ru/img/yamaha/16/122030.jpg)
Oil level warning light "
"
This warning light comes on when the engine oil level is too low.
The electrical circuits of this lamp can be checked as follows:
- 1. Set the engine stop switch to the "#" position and turn the key to the "ON" position " ("ON").
- 2. Place the transmission in neutral or press the clutch lever.
- 3. Press the starter switch. If the warning light does not come on when you press the starter switch, have your Yamaha dealer check the electrical circuits.
Note. Even if the oil level is sufficient, the warning light may flicker when driving on a slope or during sudden acceleration or deceleration, but this does not indicate a malfunction.
Neutral warning light "N"
When the transmission is in neutral, this warning light comes on.
Turn signal warning light "
"
When the turn signal switch is moved to the right or left, this warning light will flash.
Engine warning light "
"
This warning light illuminates or flashes when the electrical circuitry that controls engine operation is faulty. If this occurs, have a Yamaha dealer check the self-diagnosis system.
The electrical circuits of this lamp can be checked as follows:
1. Set the engine stop switch to the "O" position.
2. Turn the key to the "ON" position " ("ON"). If the warning light does not come on, have your Yamaha dealer check the electrical circuits.
High beam warning light "
"
This lamp lights up when the headlight's high beam lamp is on.