Magneto flywheel removal (Aprilia Shiver 750)

0

Remove the flywheel cover.

Undo and remove the screw and remove the retention plate.



Heat the magneto flywheel with the specific heater.

Lock the flywheel using the specific tool and loosen the screw.

Specific tooling: 020713Y Flywheel extractor



Screw the anticlockwise bolt of the special tool on the external body.

Keeping the external body blocked and gripping the key, screw the anticlockwise bolt so as to remove the flywheel from the crankshaft.

Specific tooling: 020713Y Flywheel extractor



Unscrew and remove the anticlockwise bolt of the special tool from the external body.


Undo the screw from the crankshaft.

Specific tooling: 020713Y Flywheel extractor

Remove the flywheel together with the freewheel.



Remove the start-up transmission gear.

In case of malfunction, the start-up transmission gear cannot be overhauled. Therefore, the complete transmission gear should be replaced.



Collect the crankshaft woodruff key.

See this article in russian language

Flywheel — removal Honda VTX 1800 C (2001-2008)
Flywheel/connecting rod — removal, installation and… Harley Softail FXST/FLST (2007-2017)
Disassembly flywheel Ducati ST2 (1997-2003)
Ignition magneto design of motorcycle БМВ F 650 GS (2000-2007)

Article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016): «Magneto flywheel removal»: https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/repair/114586 <a href="https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/repair/114586">Magneto flywheel removal</a> - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Engine repair». [url=https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/repair/114586]Magneto flywheel removal[/url] - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Engine repair».