Removing the engine from the vehicle (Aprilia SL750)

0

Carry out the operations described under Vehicle preparation.

Support the engine by means of belt and hoist.

Working on the left side, unscrew and remove the three nuts.



Working on the right side, slightly slide off the three bolts.

Collect the spacers on the opposite side.

Check the spacer sizes so as not to interchange them upon refitting.

Slide off the three bolts completely and collect their washers.



Lower the engine.

See this article in russian language

Article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016): «Removing the engine from the vehicle»: https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/repair/114576 <a href="https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/repair/114576">Removing the engine from the vehicle</a> - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Engine repair». [url=https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/repair/114576]Removing the engine from the vehicle[/url] - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Engine repair».