Lift the engine.
Place the engine so that the rear attachments on the chassis are aligned.
Working on the right side, insert the three bolts with their washers.
Working on the right side, place the spacers on the three bolts between the engine block and the chassis.
Caution! The spacers have different sizes. refit them in the same way they were before being removed.
Working from the left side, tighten the three nuts.
Release the engine from the belt and the hoist.
Refit the pinion and restore the gearing chain clearance.
Reconnect the electric connections and clamp the cable harnesses.
Carry out the vehicle preparation operations but in reverse order, restore the correct level of all fluids and carry out the adjustments that may be required.