| pos. | Description | Type | Quantity | Torque | Notes |
| 1 | Flanged TE screw fastening pinion | M10x1.25x25 | 1 | 50 Nm (36.88 lbf ft) | Loctite 270 |
| 2 | TCEI screw fastening Pin to gearbox lever and Gearbox Lever to knurled shaft | M6x16 | 2 | 10 Nm (7.37 lbf ft) | - |
| 3 | LH locknut for ball joint | M6 | 1 | 10 Nm (7.37 lbf ft) | - |
| 4 | RH locknut for ball joint | M6 | 1 | 10 Nm (7.37 lbf ft) | - |
| 5 | Screw fastening engine bracket / clutch side crankcase half | M6 | 2 | 12 Nm (8.85 lbf ft) | - |
| 6 | Map sensor union (brass) | - | 2 | 2 Nm (1.48 lbf ft) | Loctite 243 |
| 6 | Map sensor union (steel) | - | 2 | 3.50 Nm (2.58 lbf ft) | Loctite 243 |
| 7 | LH ball joint on gearbox control lever | - | 1 | 10 Nm (7.37 lbf ft) | Loctite 243 |
| 8 | RH ball joint on gearbox control lever | - | 1 | 10 Nm (7.37 lbf ft) | Loctite 243 |
| - | Fastener for positive cable on engine | - | 1 | 10 Nm (7.37 lbf ft) | - |
| - | TE screw fastening negative cable to engine | M6x12 | 1 | 10 Nm (7.37 lbf ft) | - |