- Remove tank cover.
- Remove windscreen.
- Remove instrument cover (1).
- Remove handlebar trim.
- Remove cover of fork bridge.
- From the left, disconnect light (2).
- Disconnect plug (4) for lighting.
- Remove headlight adjuster (5).
- Remove screws (3, 6).
Note: Protect interior trim against scratching.
- Use masking tape to cover tabs (arrows) on handlebars and interior trim.
- Carefully remove interior trim.
- Disconnect plug for on-board computer.
- Remove on-board computer, if necessary.
- Installation is the reverse of the removal procedure: pay particular attention to the following.
- Connect plug (4) for lighting at bottom position.