![](https://motoinstruction.ru/img/bmw/21/127513.jpg)
- Release 3 fasteners (4).
- Disengage ball joint (5) from gearshift lever.
- Remove footrest plate (1) with gearshift lever.
- Installation is the reverse of the removal procedure.
Tightening torque:
- Footrest plate, front, to frame — 21 Nm
Removing gearshift lever
- Remove the footrest plate.
Caution: Fastener (6) is secured with thread-locking compound. When heating the thread-locking compound to break the seal, take care not to overheat the plastic bushing (arrow) in the gearshift lever.
- Carefully heat fastener (6).
- Remove fastener (6) and remove gearshift lever.
- Installation is the reverse of the removal procedure.
Tightening torque:
- Foot shift lever to footrest plate — 41 Nm (clean thread + Loctite 243)