- Remove left and right fairing side sections.
- Remove windscreen.
- Remove instrument cover.
- Remove headlight adjuster (1).
- Disconnect temperature sensor (5) and parkinglight bulb (6).
- Disconnect plug for headlight (7).
- Remove 4 fasteners (3).
- Remove 5 fasteners (2, 4) from fairing bracket.
- Remove upper section of fairing.
- Installation is the reverse of the removal procedure: pay particular attention to the following.
Note: Make sure the headlight adjuster is correctly positioned as it passes through the fairing bracket (arrow).
Note: If the upper section of the fairing is under strain, remove the fasteners of the upper reflector (8) and reinstall without strain.
Tightening torques:
- Fairing screws — 2 Nm