- Remove fairing side sections.
- Remove tank cover.
- Remove upper handlebar trim.
- Release fasteners (1).
- Remove fastener (4) from seal (5).
- Remove cover of fork bridge (2) and seal (5).
- Installation is the reverse of the removal procedure: pay particular attention to the following.
- Engage seal (5) with recess (arrow) over retaining plate (9).
- Position the fork-bridge cover in the seal.
- Turn handlebars from lock to lock to make sure that the fork bridge cover clears the seal.
Tightening torques:
- Cover of fork bridge — 2 Nm