Disassembling and assembling side stand (BMW K1200LT)

0

• Disconnect the tension springs and take off the plate with the springs.
• Remove switch for side stand (arrow).

See Group 61.

Replacing side stand switch

• Remove fastener and remove side stand.
• Installation is the reverse of the removal procedure.

Cauion: Install screw and nut with Loctite 243.

Lubricant: for pivot bushing Shell Retinax EP 2.

Tightening torque:

• Side stand to pivot mount (clean thread + Loctite 243) — 41 Nm
• Switch to side stand (clean thread + Loctite 243) — 7 Nm

Removing and installing main (centre) stand

See Group 00, Lubricating main stand.

See this article in russian language

Article about repair motorcycles «BMW K-series K 1200 LT» (1998-2009): «Disassembling and assembling side stand»: https://motoinstruction.ru/en/BMW/K/K1200LT/chassis/frame/115877 <a href="https://motoinstruction.ru/en/BMW/K/K1200LT/chassis/frame/115877">Disassembling and assembling side stand</a> - article about repair motorcycles «BMW K-series K 1200 LT» (1998-2009) from section «Frame and hinged elements». [url=https://motoinstruction.ru/en/BMW/K/K1200LT/chassis/frame/115877]Disassembling and assembling side stand[/url] - article about repair motorcycles «BMW K-series K 1200 LT» (1998-2009) from section «Frame and hinged elements».