![](https://motoinstruction.ru/img/bmw/21/127612.jpg)
- Remove left and right fairing side sections.
See Group 46.
- Remove left and right handlebar trim.
- Remove cover of fork bridge.
- Remove upper section of fairing.
- Remove instrument cover.
- Release fasteners (6).
- Disconnect plug (3) for the clock.
- Pull the instrument cluster out of holder (2).
- Remove the telltale lights (5).
Note: Fasteners (4) hold the instruments in the housing (1): the screws are of different lengths and have different coatings. Make sure they are reinstalled in their original positions.
- Release fasteners (4), remove the contacts and loosely reinstall fasteners (4).
- Installation is the reverse of the removal procedure: pay particular attention to the following.
- Install the contacts and telltale/warning lights in the instrument cluster in accordance with the cable colours.
Tightening torques:
- Instrument cluster to fairing holder — 6 Nm