Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
1. Detach the grommet on the side panel infill from the lug on the underside of the frame.
1. Side panel infill (left side panel shown); 2. Grommet; 3. Lug
2. Detach the side panel rear locating lug from the grommet on the side panel bracket.
1. Rear mounting lug; 2. Grommet; 3. Side panel bracket
Note: The grommet on the front locating lug may withdraw with the side panel assembly when detaching the front mounting.
3. Detach the front mounting from the locating lug on the radiator and remove the side panel assembly.
1. Front mounting; 2. Locating lug
4. If required, remove the two fixings and remove the radiator finisher.
1. Radiator finisher; 2. M6x16 mm fixing; 3. M6x12 mm fixing
5. If required, remove the fixing and remove the side panel bracket.
1. Side panel bracket; 2. Fixing