Removing
1. Disconnect the breaker wire connector located under the left plastic lining.
![](https://motoinstruction.ru/img/honda/1/110667.jpg)
2. Using an 8 mm wrench, unscrew the seven bolts securing the left engine cover.
![](https://motoinstruction.ru/img/honda/1/110668.jpg)
3. Remove the cover, clean the surface of the cover and crankcase from the remnants of the old gasket.
![](https://motoinstruction.ru/img/honda/1/110669.jpg)
4. Using a 10 mm wrench, unscrew the three bolts securing the breaker.
![](https://motoinstruction.ru/img/honda/1/110670.jpg)
5. Remove the breaker assembly with the bracket.
![](https://motoinstruction.ru/img/honda/1/110671.jpg)
Installation
We install in the reverse order, after installing a new gasket on the cover plane.