Removing
1. Using a 10 mm wrench, unscrew the bolt securing the control unit bracket.
![](https://motoinstruction.ru/img/honda/1/110672.jpg)
2. Remove the control unit assembled with the bracket.
![](https://motoinstruction.ru/img/honda/1/110673.jpg)
3. Disconnect the wire connector from the engine control unit.
![](https://motoinstruction.ru/img/honda/1/110674.jpg)
4. Remove the bracket from the engine control unit.
![](https://motoinstruction.ru/img/honda/1/110675.jpg)
The engine control unit
Installation
Installation is carried out in the reverse order.