Removing
1. We remove the terminals of the low-voltage wires from the coil, after remembering their location on the coil. Using a 10 mm wrench, unscrew the two nuts securing the coil.
![](https://motoinstruction.ru/img/honda/1/110663.jpg)
2. Remove the coil from the seat.
![](https://motoinstruction.ru/img/honda/1/110664.jpg)
3. Remove the mounting brackets from the ignition coil.
![](https://motoinstruction.ru/img/honda/1/110665.jpg)
4. Remove the caps of high-voltage wires from the spark plugs, remembering their location.
![](https://motoinstruction.ru/img/honda/1/110666.jpg)
Removing the second coil is done in the same way.
Installation
We install the ignition coil in the reverse order. If necessary, clean the contacts from dirt and corrosion.