![](https://motoinstruction.ru/img/honda/9/116197.jpg)
![](https://motoinstruction.ru/img/honda/9/116198.jpg)
Disconnect the clutch switch connectors.
Remove the bolts, master cylinder holder and clutch master cylinder from the handlebar.
![](https://motoinstruction.ru/img/honda/9/116199.jpg)
Keep the master cylinder upright to prevent air from entering the hydraulic system.
Remove the attaching screws and the left handlebar switch housing from the handlebar.
![](https://motoinstruction.ru/img/honda/9/116200.jpg)
Remove the left handlebar grip end cap.
Remove the left handlebar grip from the handlebar.
Remove the left handlebar switch housing end.
![](https://motoinstruction.ru/img/honda/9/116201.jpg)
Disconnect the front brake switch connectors.
Remove the bolts, front brake master cylinder holder and master cylinder from the handlebar.
![](https://motoinstruction.ru/img/honda/9/116202.jpg)
Keep the master cylinder upright to prevent air from entering the hydraulic system.
Remove the attaching screws.
![](https://motoinstruction.ru/img/honda/9/116203.jpg)
If the handlebar lower holders will be removed, loosen the lower holder nuts before removing the upper holder.
![](https://motoinstruction.ru/img/honda/9/116204.jpg)
Remove the bolt caps.
![](https://motoinstruction.ru/img/honda/9/116205.jpg)
Remove the upper holder bolts and the handlebar upper holder.
Remove the handlebar from the lower holders.
![](https://motoinstruction.ru/img/honda/9/116206.jpg)
Move the handlebar to obtain sufficient slack in the throttle cables so they can be disconnected from the throttle grip flange.
Remove the right handlebar switch housing from the handlebar.
![](https://motoinstruction.ru/img/honda/9/116207.jpg)
Remove the handlebar lower holder nuts, washers and the handlebar lower holders.