Install the side collar into the right wheel hub.
Install the side collar into the left wheel hub.
Place the front wheel between the fork legs.
Insert the front axle from the left side until it is fully seated.
Install and tighten the axle bolt to the specified torque.
Torque: 90 N·m (9.2 kgf·m, 67 lbf·ft).
Tighten the right axle pinch bolts to the specified torque.
Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft).
Install new brake caliper mounting bolts and tighten the them to the specified torque.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
Install the brake hose clamps and tighten the bolts securely.
With the front brake applied, pump the fork up and down several times to seat the axle and check brake operation by applying the brake lever and pedal.
Tighten the left axle pinch bolts to the specified torque.
Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft).
Install the bolt caps to the axle pinch bolts securely.
Check the clearance between the brake disc and caliper bracket on each side after installation.
The clearance should be at least 0.7 mm (0.03 in).