Remove the cam chains from the drive sprockets.
![](https://motoinstruction.ru/img/honda/9/116045.jpg)
Remove the left crankcase bolt.
![](https://motoinstruction.ru/img/honda/9/116046.jpg)
Loosen the right crankcase bolts and remove them with the washer.
![](https://motoinstruction.ru/img/honda/9/116047.jpg)
![](https://motoinstruction.ru/img/honda/9/116048.jpg)
Place the crankcase assembly with the left side down.
Carefully separate the right crankcase from the left crankcase.
![](https://motoinstruction.ru/img/honda/9/116049.jpg)
Use the pry slots at the front and rear of the crankcase if necessary.
Remove the dowel pins and O-ring.
![](https://motoinstruction.ru/img/honda/9/116050.jpg)
Refer to following pages for service of the each part. For the crankcase assembly, see page 11-17.