Change the oil in the main gear at the intervals specified in the Maintenance Schedule.
Change the final drive oil with the engine warm and the motorcycle standing upright on a level, hard surface to ensure that the oil drains completely and quickly.
1. To drain the oil, remove the filler plug (1) and drain plug (2).
2. After the oil has completely drained, make sure that the sealing washer (3) the drain plug is in satisfactory condition and tighten the drain plug. Drain plug tightening torque: 20 Nm.
3. Place the motorcycle on the side stand, fill the main gear with the recommended type of oil; approximately: 120 cm3.
Make sure the final drive is filled with the recommended oil to the bottom edge of the inspection window (4).
4. Reinstall the oil filler cap.
(1) Oil filler cap; (2) Drain bolt; (3) Sealing washer; (4) Control window