Perform the following maintenance operations in accordance with Maintenance regulations.
Make sure there is no damage or loss of spring elasticity (1), check how freely the side stop moves.
(1) Side support spring
Check the operation of the automatic ignition switch-off system with the side support installed:
1. Sit on the motorcycle, raise the side stand and put the transmission in neutral.
2. Start the engine and, by pressing the clutch lever, engage the gear in the gearbox.
3. Lower the side stand. The engine should stop as soon as you lower the side stand.
If the side stand system does not operate as described above, have it repaired by an authorized Honda dealer.