- Rating of Bulb [C]: 12 V x (3-3.4) W
- 12 V Battery [D]
Caution! Be sure to connect the bulb in series. The bulb works as a current limiter to protect the solenoid in the injector from excessive current.
Connect the test light set to the injector [E] as shown.
Open and connect [F] the end of the wire to the battery (-) terminal repeatedly. The injector should click.
![](https://motoinstruction.ru/img/kawasaki/13/118856.jpg)
★ If the injector does not click, replace the injector.
★ If the injector clicks, check the wiring again. If the wiring is good, replace the injector (may be clogged) or ECU.