Throttle grip free play inspection
Refer to Throttle Control System Inspection in the Periodic Maintenance Chapter.
Throttle grip free play adjustment
Loosen the locknuts [A] and screw the adjusters [B] all the way in so as to give the throttle grip plenty of play.
Turn out the adjuster of the decelerator cable [D] until there is no play.
Tighten the locknut against the adjuster.
Turn the adjuster of the accelerator cable [C] until the proper amount of throttle grip free play is obtained and tighten the locknut against the adjuster.
![](https://motoinstruction.ru/img/kawasaki/13/118859.jpg)
Warning! Operation with incorrectly routed or improperly adjusted cables could result in an unsafe riding condition.
Cable removal/installation
see Throttle body assy and Intake Manifold section in this chapter for removal/installation of the throttle cables.
Cable lubrication and inspection
Whenever the throttle cables are removed or in accordance with the Periodic Maintenance Chart, lubricate the these cables. Refer to the General Lubrication in the Periodic Maintenance Chapter.
Use a commercially available pressure cable lubricator to lubricate these cables.
With the cable disconnected at both ends, the cable should move freely in the cable housing.