Removal
Remove:
- Left Lower Fairing (see Frame chapter)
- Coolant Reserve Tank [A]
- Fuel Tank (see Fuel System chapter)
- Alternator Lead Connector [B]
Place a suitable container under the alternator cover [C], and remove the cover.
Installation
Apply silicone sealant to the alternator lead grommet and crankcase halves mating surface [A] on the front and rear sides of the cover mount.
Sealant - Kawasaki Bond (Silicone Sealant): 56019-120
Check that knock pins [B] are in place on the crankcase.
Install a new gasket and the alternator cover.
Tighten the cover bolts.
Torque - Alternator Cover Bolts: 12 N·m (1.2 kg·m, 104 in·lb)