- Cylinder Head Cover (see Cylinder Head Cover Removal)
- Pickup Coil Cover
Position the crankshaft at #1, 4 piston TDC.
- [A] TDC mark for #1, 4 pistons
- [B] Timing Mark (crankcase halves mating surface)
Remove:
- Camshaft Chain Tensioner (see Camshaft Chain Tensioner Removal)
- Rubber Gaskets and Cylinder Head Cover Gasket
- Camshaft Cap Bolts
- Chain Guide [A]
- Camshaft Cap [B]
- Camshafts [C]
Stuff a clean cloth into the chain tunnel to keep any parts from dropping into the crankcase.
Caution! The crankshaft may be turned while the camshafts are removed. Always pull the chain taut while turning the crankshaft. This avoids kinking the chain on the lower (crankshaft) sprocket. A kinked chain could damage both the chain and the sprocket.