Cylinder head warp (Kawasaki ZX600-J1)

0

Lay a straightedge across the lower surface of the cylinder head at several positions.

Use a thickness gauge [A] to measure the space between the straightedge [B] and the head.

Cylinder Head Warp
Standard: —
Service Limit: 0.05 mm

★ If the cylinder head is warped more than the service limit, replace it.

★ If the cylinder head is warped less than the service limit, repair the head by rubbing the lower surface on emery paper secured to a surface plate (first No. 200, then No. 400).

See this article in russian language

Article about repair motorcycles «Kawasaki ZX-6R ZX600-J1/J2» (2000-2002): «Cylinder head warp»: https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/engine/repair/111303 <a href="https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/engine/repair/111303">Cylinder head warp</a> - article about repair motorcycles «Kawasaki ZX-6R ZX600-J1/J2» (2000-2002) from section «Engine repair». [url=https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/engine/repair/111303]Cylinder head warp[/url] - article about repair motorcycles «Kawasaki ZX-6R ZX600-J1/J2» (2000-2002) from section «Engine repair».