![](https://motoinstruction.ru/img/suzuki/14/120702.jpg)
1. Frame; 2. Rear shock absorber; 3. Washer; 4. Cushion lever; 5. Cushion rod; 6. Swingarm; A. Left; B. Right
Swingarm bearing
Install the bearings and spacer into the swingarm pivot all together with the special tools.
- 09941-34513: Steering race installer
- 09913-70210: Bearing installer set (∅32)
Note: When installing the bearing, the stamped mark on the bearing must face the special tool.
![](https://motoinstruction.ru/img/suzuki/14/120703.jpg)
Install the cushion rod bearings with the special tool.
- 09941-34513: Steering race installer
Note: When installing the bearing, the dust seal that is embedded in the bearing must face outside.
![](https://motoinstruction.ru/img/suzuki/14/120704.jpg)
Cushion lever bearing
Press the bearings into the cushion lever with the special tool.
- 09941-34513: Steering race installer
Note: When installing the bearing, the dust seal that is embedded in the bearing must face outside.
![](https://motoinstruction.ru/img/suzuki/14/120705.jpg)
Apply SUZUKI SUPER GREASE to the bearings and spacers.
- 99000-25030: SUZUKI SUPER GREASE "A" (USA)
- 99000-25010: SUZUKI SUPER GREASE "A" (Others)
![](https://motoinstruction.ru/img/suzuki/14/120706.jpg)
![](https://motoinstruction.ru/img/suzuki/14/120707.jpg)