Swingarm
Insert the swingarm pivot shaft and tighten it to the specified torque with the special tool.
- Swingarm pivot shaft: 15 N·m (1.5 kgf·m, 11.0 lb·ft)
- 09944-28320: Hexagon bit 19 mm
![](https://motoinstruction.ru/img/suzuki/14/120708.jpg)
Hold the swingarm pivot shaft (1) with the special tool and tighten the swingarm pivot nut (2) to the specified torque.
- 09944-28320: Hexagon bit 19 mm
- Swingarm pivot nut: 100 N·m (10.0 kgf·m, 72.5 lb·ft)
![](https://motoinstruction.ru/img/suzuki/14/120709.jpg)
Tighten the swingarm pivot lock-nut to the specified torque with the special tool.
- 09940-14940: Swingarm pivot thrust adjuster socket wrench
- Swingarm pivot lock-nut: 90 N·m (9.0 kgf·m, 65.0 lb·ft)
![](https://motoinstruction.ru/img/suzuki/14/120710.jpg)
Cushion lever and cushion rod
Install the washers (1) and cushion lever (2).
Note: Insert the cushion lever mounting bolt from the left side. (7-54)
![](https://motoinstruction.ru/img/suzuki/14/120711.jpg)
Install the cushion rod and rear shock absorber.
Note: Insert the cushion rod mounting bolts and rear shock absorber mounting bolts from the left side. (7-54)
Tighten the cushion lever nut (3), cushion rod nut (4) and rear shock absorber lower mounting nut (5) to the specified torque.
- Cushion lever nut: 78 N·m (7.8 kgf·m, 56.5 lb·ft)
- Cushion rod nut: 78 N·m (7.8 kgf·m, 56.5 lb·ft)
- Rear shock absorber lower mounting nut: 50 N·m (5.0 kgf·m, 36.0 lb·ft)
![](https://motoinstruction.ru/img/suzuki/14/120712.jpg)
Install the rear wheel. (7-40)
Install the exhaust pipe and muffler. (3-14)