Front brake wear inspection (Triumph Street Triple 765 R/RS)
- Main
- Triumph
- Street Triple
- 765 R/RS [4]
- Running gear and frame
- Brake system
- Front brake wear inspection
Brake pads must be inspected in accordance with scheduled requirements and replaced if worn to, or beyond the minimum service thickness.
1. Carrier plate; 2. Brake pad
Minimum lining thickness — 1.5 mm
If the lining thickness of any pad is less than that specified in the table, replace all the pads on the wheel.
The article is reprinted from this resource motoinstruction.ru
Brake pads for this model supplied by Triumph will have the carrier plate at the correct thickness. Always have replacement brake pads supplied and fitted by your Triumph dealer.
1. Carrier plate; 2. Brake pad lining
1. Carrier plate; 2. Brake pad
Minimum lining thickness — 1.5 mm
If the lining thickness of any pad is less than that specified in the table, replace all the pads on the wheel.
The article is reprinted from this resource motoinstruction.ru
Warning!
- Always have replacement brake pads supplied and fitted by your Triumph dealer.
- The ABS calibration is optimised for use with the friction material provided on brake pads supplied by Triumph.
- The use of proprietary brands of brake pads is not recommended as differing friction material specifications will affect the performance of the ABS, potentially causing loss of motorcycle control and an accident.
Warning!
- Brake pads for this model supplied by Triumph are specifically designed for use with the brake calipers fitted to your motorcycle.
- The use of proprietary brands of brake pads is not recommended as these may have a reduced carrier plate thickness when compared with the Triumph genuine parts.
- Brake pads with an incorrect carrier plate thickness can potentially become dislodged from the caliper body as they wear, leading to brake failure, loss of motorcycle control and an accident.
Brake pads for this model supplied by Triumph will have the carrier plate at the correct thickness. Always have replacement brake pads supplied and fitted by your Triumph dealer.
1. Carrier plate; 2. Brake pad lining
See this article in russian language
This article has been reviewed: Kirill Prokofiev
Similar articles about motorcycles of other brands
Checking front brake pad wear, changing brake pads Ducati ST2 (1997-2003)Front brake caliper defect detection Suzuki DRZ 250 (1996-2007)
Adjusting the front disc brake Yamaha FZ1 Fazer (2006-2015)
Brake lining wear Kawasaki ZX6R/ZX600J (2000-2002)
Front brake master cylinder and reservoir Harley-Davidson V-Rod (2002-2006)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Engine and systems
- Engine repair
- Fuel and control system
- Lubrication system
- Cooling system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Wheels and tires
- Electric equipment
- Equipment and devices
- Starting and charging system
- Electrical circuits