Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
Warning!
- Operation of the motorcycle with an incorrectly adjusted instrument panel is dangerous.
- An incorrectly adjusted instrument panel will result in loss of instrument vision when riding and may cause a distraction leading to loss of control of the motorcycle and an accident.
- Always adjust the instrument panel to provide sufficient vision of the instruments before riding the motorcycle.
Caution!
- Do not press directly onto the display panel.
- Only adjust the position of the instrument display using the adjustment handle.
- Pressing directly on the instrument display panel may damage the display panel.
Note: Note the position of the instrument screen inso that it can be returned to its original setting.
1. Adjust the instrument display panel to its lowest position.
![](https://motoinstruction.ru/img/triumph/15/121858.jpg)
1. Adjustment handle
2. Release the two fixings and remove the fascia panel.
![](https://motoinstruction.ru/img/triumph/15/121859.jpg)
1. Fascia panel; 2. Fixings
3. Release the fixing and remove the flyscreen assembly. Disconnect the electrical connector for the ambient air pressure sensor for complete removal.
![](https://motoinstruction.ru/img/triumph/15/121860.jpg)
1. Fascia panel; 2. Flyscreen Assembly; 3. Fixings
4. Release the two rivets and two fasteners and remove the air intake duct from the flyscreen assembly.
![](https://motoinstruction.ru/img/triumph/15/121861.jpg)
1. Rivets; 2. Flyscreen assembly; 3. Fasteners; 4. Duct
5. Release the two fixings from the air intake finisher.
6. Press the flyscreen locating tang inwards to release the air intake finisher. Remove the finisher.
![](https://motoinstruction.ru/img/triumph/15/121862.jpg)
1. Fixings; 2. Flyscreen locating tang; 3. Air intake finisher