Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Caution!
- To prevent damage to the seats or seat covers, care must be taken not to drop the seats. Do not lean the seats against the motorcycle or any surface which may damage the seats or seat covers. Instead, place the seats, with the seat cover facing upwards, on a clean, flat surface which is covered with a soft cloth.
- Do not place any item on the seats which may cause damage or staining to the seat covers.
Note: The passenger seat or the seat cowl must be removed prior to removing the rider's seat.
Passenger seat/seat cowl
1. Insert the ignition key into the seat lock and turn it anticlockwise while pressing down on the front of the seat. This will release the passenger seat from its lock and allow it to be slid forwards for complete removal from the motorcycle
1. Seat lock; 2. Passenger seat shown
Rider's seat
1. Remove the passenger seat/seat cowl as described above.
2. Remove the fixing at the rear of the seat.
3. Lift the seat up from the back and slide rearwards for complete removal from the motorcycle.
1. Fixing