Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
1. Mirror (left hand shown); 2. Fixing; 3. Washers; 4. Rubber sleeve
1. Fit the mirror to the motorcycle ensuring that the four washers and rubber sleeve are positioned as noted during removal. Secure with a new fixing, do not tighten at this stage.
2. Position the mirror arm to give rear visibility in the riding position.
3. Tighten the fixing to 25 Nm.
4. Repeat the procedure for the other mirror.