Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
1. Fit the air intake finisher to the flyscreen ensuring that the finisher is located correctly onto the locating tang. Secure with two fixings and tighten to 1.5 Nm.
![](https://motoinstruction.ru/img/triumph/15/121863.jpg)
1. Fixings; 2. Flyscreen locating tang; 3. Air intake finisher
2. Fit the air intake duct to the flyscreen assembly and secure with two fasteners and two rivets.
![](https://motoinstruction.ru/img/triumph/15/121864.jpg)
1. Rivets; 2. Flyscreen assembly; 3. Fasteners; 4. Air intake duct
![](https://motoinstruction.ru/img/triumph/15/121865.jpg)
1. Fasteners; 2. Air intake finisher; 3. Air intake duct
3. Position the assembly to the motorcycle and reconnect the electrical connector for the ambient air temperature sensor.
4. Ensure that the flyscreen and air intake duct assembly is correctly positioned to the front subframe and secure with the fixing. Tighten the fixing to 3 Nm.
![](https://motoinstruction.ru/img/triumph/15/121866.jpg)
1. Flyscreen assembly; 2. Fixing
5. Fit the fascia panel to the front subframe ensuring that its locating lugs are fully inserted into the rubber grommets. Secure with the two fixings and tighten to 3 Nm.
![](https://motoinstruction.ru/img/triumph/15/121867.jpg)
1. Fascia panel; 2. Locating lugs; 3. Rubber grommets; 4. Fixings
Perform the following operations: