Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
- Seat - removal
- Battery - removal
- Fuel tank - removal
- Airbox - removal
- Throttle bodies/injectors - removal
- Coolant expansion tank - removal
- Purge control valve (if fitted) - removal
1. Release the fixing and detach the engine sub-harness bracket from the engine breather cover.
![](https://motoinstruction.ru/img/triumph/15/121986.jpg)
1. Engine sub-harness bracket; 2. Fixing
2. Disconnect the low oil pressure warning light switch.
3. Ease the boot from the starter cable terminal and then release the cable bolt.
4. Detach the cable from the starter motor.
Note: Note the position of the mounting bracket for the crankshaft position sensor multiplug for installation.
5. Release the fixings securing the starter to the crankcase.
![](https://motoinstruction.ru/img/triumph/15/121987.jpg)
1. Fixings; 2. Starter motor; 3. Multiplug, crankshaft position sensor
6. Ease the starter motor from the upper crankcase.
Starter motor inspection
1. Ensure the starter turns freely and without binding.
2. Check the starter O-ring for damage and deterioration. Replace as necessary.