2. Apply silicone sealer to the cable grommet (at the factory, ThreeBond 1215 is used) and align the cable to the exit slot.
3. Fit the cable retainer brackets and tighten the new fixings to 6 Nm.
4. Tighten the alternator stator new fixings to 12 Nm.
5. Tighten the crankshaft position sensor new fixings to 6 Nm.
![](https://motoinstruction.ru/img/triumph/15/121991.jpg)
1. Fixings; 2. Crankshaft position sensor; 3. Cable brackets; 4. Alternator stator
Perform the following operations: