Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
- Seat - removal
- Battery - installation
- Fuel tank - removal
- Airbox - removal
- Throttle bodies/injectors - removal
- Front sprocket cover - removal
- Coolant expansion tank - removal
- Alternator cover - removal
Note: If the alternator stator needs to be replaced, the crankshaft position sensor will also be replaced as they are one assembly.
Note: Note the routing of the stator harness for installation.
1. Remove and discard the fixings securing the crankshaft position sensor to the alternator cover.
2. Remove and discard the fixing securing the cable bracket to the alternator cover.
3. Remove and discard the fixings securing the stator to the alternator cover and remove the stator.
![](https://motoinstruction.ru/img/triumph/15/121990.jpg)
1. Fixings; 2. Crankshaft position sensor; 3. Cable brackets; 4. Alternator stator