Stanchion tube
Inspect the sliding surface for scoring and/or scratching. Eliminate minor scoring with wet sand paper (grain size 1).
Replace the stanchion (1) if badly scored.
Check for stanchion (1) buckling using a dial gauge.
Replace the stanchion if buckled beyond the service limit.
Service limit: 0.2 mm.
Danger! Never attempt to straighten a buckled stanchion as this would weaken the overall structure leading to a dangerous riding condition.
Slider
Inspect for damage and/or cracking. Replace if damaged.
Check the condition of the slide bushes (2).
Change any component which is badly worn or damaged.
Warning! Clean off any debris collected by the bushes taking care not to scratch the bush surface.
Renew the following components on assembly:
- oil seal (3);
- dust seal (4);
- top cap O-ring (5).