Tightening torques — clutch pump (Aprilia Shiver 750)
- Main
- Aprilia
- Shiver
- SL 750
- Information for owner
- Technical characteristics
- Tightening torques — clutch pu…
| pos. | Description | Type | Quantity | Torque | Notes |
| 1 | Clutch cylinder fastener | M6 | 2 | 10 Nm (7.37 lbf·ft) | - |
| 2 | Pipe union with bleed outlet (Heng Tong) fastening pipe to cylinder | M10x1 | 1 | 25 Nm (18.44 lbf·ft) | - |
| 3 | Fastener for clutch pump on handlebar | - | 2 | 10 Nm (7.37 lbf·ft) | - |
| 4 | Screw fastening clutch control mounting on flywheel side crankcase half | M6 | 1 | 12 Nm (8.85 lbf·ft) | - |
| 5 | Union with breather - fixing pipe to clutch pump | M10x1 | 1 | 25 Nm (18.44 lbf·ft) | - |
(The article is reprinted from this resource: Motoinstruction)
See this article in russian language
This article has been reviewed: Serafim Sazonov
Similar articles about motorcycles of other brands
Tightening torques BMW R 1150 GS (1999-2004)Tightening torques of fastening elements Suzuki V-Strom DL-650 (2004-2011)
Engine tightening torques Yamaha FZ1 Fazer (2006-2015)
Tightening torques for threaded connections Ducati ST2 (1997-2003)
Exploded view — clutch controls Triumph Rocket III (2004-2018)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Control devices
- Operation manual
- Technical characteristics
- Maintenance
- Engine and systems
- Engine repair
- Lubrication system
- Cooling system
- Fuel system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Electric equipment
- Equipment and devices