Tightening torques — clutch cover (Aprilia Shiver 750)
- Main
- Aprilia
- Shiver
- SL 750
- Information for owner
- Technical characteristics
- Tightening torques — clutch co…
| pos. | Description | Type | Quantity | Torque | Notes |
| 1 | Fastener screw for Clutch Cover / Clutch side cover | M6 | 6 | 13 Nm (9.59 lbf·ft) | - |
| 2 | Clutch fastener nut | M24x1.5 | 1 | 180 Nm (132.76 lbf·ft)±5% | Chamfer |
| 3 | Fastening oil filler plug on Clutch cover | - | 1 | 2 Nm (1.48 lbf·ft) | - |
| 4 | Screw fastening fixing Plate / Clutch control Mounting | M5 | 3 | 5.50 Nm (4.06 lbf·ft) | - |
| 5 | Screw fastening clutch control mounting on flywheel side crankcase half | M6 | 2 | 13 Nm (9.59 lbf·ft) | - |
(This article is taken from a source: MotoInstruction)
See this article in russian language
This article has been reviewed: Serafim Sazonov
Similar articles about motorcycles of other brands
Tightening torques of fastening elements Suzuki V-Strom DL-650 (2004-2011)Exploded view — clutch cover Triumph Rocket III (2004-2018)
Clutch cover — removal and installation Kawasaki ZX6R/ZX600J (2000-2002)
Tightening torques BMW R 1150 GS (1999-2004)
Removing the gear change lever, the sprocket cover and the… Ducati ST2 (1997-2003)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Control devices
- Operation manual
- Technical characteristics
- Maintenance
- Engine and systems
- Engine repair
- Lubrication system
- Cooling system
- Fuel system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Electric equipment
- Equipment and devices