Removing needle roller bearings and needle roller races
Remove angled lever.
Remove bearing bushings (4, 11, 10).
Lever out sealing rings (6, 7) with screwdriver.
Note: To facilitate removal, heat the angled lever to 100°C (212°F).
Use temperature measuring device, BMW # 00 1 900, to check heat rise.
Drive out needle roller bearings (8, 9) with drift, BMW # 33 6 620.
Drive out needle roller races (5) with drift, BMW # 33 6 661.
Installing needle roller bearings and needle roller races
Heat bearing seats to 100°C (212°F).
Drive in needle roller bearing (9) with drift, BMW # 33 6 631, working from both sides.
Press-in depth "A": 4 mm (0.16 in).
Press in needle roller bearing (8) with drift, BMW # 33 6 631.
Press-in depth "B": 4 mm (0.16 in).
Drive in needle roller races (5) with drift, BMW # 33 6 611, and spacing sleeve, BMW # 33 6 613, working from both sides.
Press-in depth "C": 4.5 mm (0.18 in).
Press in sealing rings (7) with drift, BMW # 33 6 631, and spacing ring, BMW # 33 6 632.
Press in sealing rings (6) with drift, BMW # 33 6 611, and spacing ring, BMW # 33 6 614.
Install bearing bushings (4, 11, 10).