Removing and installing needle roller races in rear swinging fork (BMW F650GS)

0

Removing needle roller races

Remove bearing bushes (4) and sealing rings (5) from swinging arm.

Caution! Protect mating faces (arrow) of the swinging arm from scratches by covering with masking tape or similar.

Drive needle roller races out of rear swinging arm with drift, BMW No. 336 661.

Installing needle roller races

Heat bearing seats to 100°C (212°F).

Press in the inner needle roller races with drift, BMW No. 33 6 651.

Press-in depth "A": 36.5 mm (1.44 in).



Press in the outer needle roller races with drift, BMW No. 33 6 651, and spacing sleeve, BMW No. 33 6 652.

Fit bearing bushes and sealing rings into swinging arm.

Press-in depth "B": 3 mm (0.12 in).

See this article in russian language

Article about repair motorcycles «BMW F-series F 650 GS» (2000-2007): «Removing and installing needle roller races in rear swinging fork»: https://motoinstruction.ru/en/BMW/F/F650GS/chassis/rsusp/112662 <a href="https://motoinstruction.ru/en/BMW/F/F650GS/chassis/rsusp/112662">Removing and installing needle roller races in rear swinging fork</a> - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Rear suspension». [url=https://motoinstruction.ru/en/BMW/F/F650GS/chassis/rsusp/112662]Removing and installing needle roller races in rear swinging fork[/url] - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Rear suspension».