Installing countershaft for starter motor (BMW F650GS)

0

Turn engine in assembly fixture so that magnet side is uppermost.

Note: Oil the bearing bushing for freewheel gear (6) and the straight pins.

Slide freewheel gear (6) with the press-fit bearing bushing, onto the crankshaft.

Push intermediate starter gear (7) on to the straight pin.

Engage double gear wheel (9) on locating pin.

Install spacer sleeve (10) and thrust washer (8).

See this article in russian language

Article about repair motorcycles «BMW F-series F 650 GS» (2000-2007): «Installing countershaft for starter motor»: https://motoinstruction.ru/en/BMW/F/F650GS/engine/repair/112586 <a href="https://motoinstruction.ru/en/BMW/F/F650GS/engine/repair/112586">Installing countershaft for starter motor</a> - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Engine repair». [url=https://motoinstruction.ru/en/BMW/F/F650GS/engine/repair/112586]Installing countershaft for starter motor[/url] - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Engine repair».