Static balancing of front wheel
- Level balancer, BMW No. 36 3 600, using knur-led-head screws (2) and spirit level (1).
- Insert the balancing shaft, BMW No. 363621, through the front wheel.
- Hand-tighten the balancing shaft with knurled nut, BMW No. 363622.
- Place front wheel on balancer, BMW No. 363600.
- Rotate the front wheel and allow it to come to a halt.
- Clean the attachment points for the adhesive weights.
Caution: The maximum balancing weight is 60 g (2.1 oz.).
- Affix the adhesive weights (arrows) uniformly spaced on both sides of the rim opposite the wheel's heaviest point.
- Repeat the balancing procedure as a check.
Static balancing of rear wheel
Note: The rear wheel can also be balanced dynamically.
- Level balancer, BMW No. 36 3 600, using knur-led-head screws (2) and spirit level (1).
- Attach mounting fixture, BMW No. 363618, to the centering-collar side of the rear wheel.
- Pass the balancing shaft, BMW No. 36 3 607, through the rear wheel.
- Hand-tighten the balancing shaft with knurled nut, BMW No. 363619.
- Place the rear wheel on the balancer, BMW No. 363600.
- Rotate the rear wheel and allow it to come to a halt.
- Clean the attachment points for the adhesive weights.
Caution: The maximum balancing weight is 60 g (2.1 oz.).
- Affix the adhesive weights (arrows) uniformly spaced on both sides of the rim opposite the wheel's heaviest point.
- Repeat the balancing procedure as a check.