Removing
1. Disconnect the connectors from the temperature gauge sensor and «masses».
![](https://motoinstruction.ru/img/honda/1/110112.jpg)
2. Using an 8 mm wrench, unscrew the two bolts securing the thermostat housing.
![](https://motoinstruction.ru/img/honda/1/110113.jpg)
3. Move the thermostat housing on the hoses to the side. Using an 8 mm wrench, unscrew the two thermostat cover bolts.
![](https://motoinstruction.ru/img/honda/1/110114.jpg)
4. Open the thermostat cover. The sealing ring must be replaced.
![](https://motoinstruction.ru/img/honda/1/110115.jpg)
5. Remove the valve from the body.
![](https://motoinstruction.ru/img/honda/1/110116.jpg)
Installation
Installation is carried out in the reverse order. After assembly, check the operation of the thermostat (see «Thermostat - check without removal»).