Removal/installation
Remove the intake duct control solenoid valve (page 5-73).
Disconnect the PAIR solenoid valve 2P connector.
![](https://motoinstruction.ru/img/honda/9/115709.jpg)
Disconnect the PAIR air suction hoses.
Remove the bolt and PAIR solenoid valve.
Installation is in the reverse order of removal.
![](https://motoinstruction.ru/img/honda/9/115710.jpg)
Inspection
Remove the PAIR solenoid valve.
Check that the air should not flow from (A) to (B), only when the 12-V battery is connected to the PAIR solenoid valve terminals.
![](https://motoinstruction.ru/img/honda/9/115711.jpg)
Check the resistance between the terminals of the PAIR solenoid valve.
Standard: 20-24 Ω (20°C/68°F).
If the resistance is out of specification, replace the PAIR solenoid valve.
![](https://motoinstruction.ru/img/honda/9/115712.jpg)