Engine stop relay — inspection (Honda VTX1800C)

0

Disconnect the engine stop relay 4P connector, remove the engine stop relay.



Connect the ohmmeter to the engine stop relay connector terminals.

Connection: Red/white - Black/white.

Connect the 12-V battery to the following engine stop relay connector terminals.

Connection: Red/orange - Black.

There should be continuity only when the 12-V battery is connected.

If there is no continuity when the 12-V battery is connected, replace the engine stop relay.

See this article in russian language

Article about repair motorcycles «Honda VTX series VTX 1800 C» (2001-2008): «Engine stop relay — inspection»: https://motoinstruction.ru/en/Honda/VTX/1800C/engine/fuel/112326 <a href="https://motoinstruction.ru/en/Honda/VTX/1800C/engine/fuel/112326">Engine stop relay — inspection</a> - article about repair motorcycles «Honda VTX series VTX 1800 C» (2001-2008) from section «Fuel and control system». [url=https://motoinstruction.ru/en/Honda/VTX/1800C/engine/fuel/112326]Engine stop relay — inspection[/url] - article about repair motorcycles «Honda VTX series VTX 1800 C» (2001-2008) from section «Fuel and control system».