Sidestand Removal
- Raise the rear wheel off the ground with stand [A].
![](https://motoinstruction.ru/img/kawasaki/23/129073.jpg)
Remove:
- Sidestand Switch Bolt [A]
- Clamp [B]
- Sidestand Switch [C]
![](https://motoinstruction.ru/img/kawasaki/23/129074.jpg)
Remove:
- Spring [A]
- Sidestand Nut [B]
- Sidestand Bolt [C]
- Sidestand [D]
![](https://motoinstruction.ru/img/kawasaki/23/129075.jpg)
Sidestand Installation
- Apply grease to the sliding area [A] of the sidestand [B].
- Tighten the bolt and lock them with the nut.
Torque - Sidestand Bolt [C]: 44 Nm (4.5 kgf·m 32 ft·lb)
- Hook the spring [D] so that face the long spring end upward.
- Install the spring hook direction as shown.
- Install the sidestand switch [E] and clamp [F].
- Apply a non-permanent locking agent to the thread of the switch bolt [G].
Torque - Sidestand Switch Bolt: 3.9 Nm (0.40 kgf·m, 35 in·lb)
![](https://motoinstruction.ru/img/kawasaki/23/129076.jpg)