Front Fender Removal
Remove:
- Brake Hose Clamps [A]
- Bolts [B] (Both Sides)
- Remove the front fender [C] upward.
![](https://motoinstruction.ru/img/kawasaki/23/129058.jpg)
Front Fender Installation
- Installation is the reverse of removal.
lnstall the brake hose clamps to the front fender holes.
Flap and Rear Fender Rear Removal
- Remove the seat covers (See Seat) Cover Removal).
- Open the clamps [A].
- Disconnect the connectors [B].
- Remove the bolts [C].
![](https://motoinstruction.ru/img/kawasaki/23/129059.jpg)
- Remove the bolts [A].
![](https://motoinstruction.ru/img/kawasaki/23/129060.jpg)
- Pull out the flap [A], turn signal lights and license plate light downward.
Clear the leads [B] from the rear fender rear [C].
![](https://motoinstruction.ru/img/kawasaki/23/129061.jpg)
Remove:
- Tail/Brake Light [A] (See Tail/Brake Light Removal in the Electrical System chapter)
- Owner's Tool [B]
- For models equipped with an ABS, remove the ABS fuse boxes [C].
![](https://motoinstruction.ru/img/kawasaki/23/129062.jpg)
Push the center pin, and then remove the quick rivet [A]. Pull out the rear fender rear backward and downward.
![](https://motoinstruction.ru/img/kawasaki/23/129063.jpg)
Flap and Rear Fender Rear Installation
- Installation is the reverse of removal.
Route the harness and leads correctly (See Cable, Wire, and Hose Routing section in the Appendix chapter).
Rear Fender Front Removal
Remove:
- Fuel Tank (See Fuel Tank Removal in the Fuel System (DFI) chapter)
- Clamp [A] (Open)
- Bolts [B]
- Bracket [C]
![](https://motoinstruction.ru/img/kawasaki/23/129064.jpg)
- Open the clamp [A].
![](https://motoinstruction.ru/img/kawasaki/23/129065.jpg)
Remove:
- Battery (see Battery Removal in the Electrical System chapter)
- Relay Box (See Relay Box Removal in the Electrical System chapter)
- Starter Relay (See Starter Relay Inspection in the Electrical System chapter)
- Fuse Box [A]
- Clamp [B]
- Unscrew the bolt [C] and pull out the rear break reservoir tank [D] downward.
- Push the center pin, and then remove the quick rivet [E].
- Remove the rear fender front [A] backward and upward.
![](https://motoinstruction.ru/img/kawasaki/23/129066.jpg)
Rear Fender Front Installation
- Installation is the reverse of removal.
Route the harness and leads correctly (See Cable, Wire, and Hose Routing section in the Appendix chapter).
![](https://motoinstruction.ru/img/kawasaki/23/129067.jpg)