- Drain the engine oil (See Engine Oil Change).
- Remove the oil filter [A] with the oil filter wrench [B].
Special Tool - Oil Filter Wrench: 57001-1249
- Replace the filter with a new one.
- Apply engine oil to the gasket [A] before installation.
- Tighten the filter with the oil filter wrench.
Torque-Oil Filter: 17.5 N·m (1.8 kgf·m, 13 ft·lb)
Note: Hand tightening of the oil filter can not be allowed since it does not reach to this tightening torque.
- Pour in the specified type and amount of oil (See Engine Oil Change).