Stick Coils (See Stick Coil (Ignition Coil together with Spark Plug Cap) Removal in the Electrical System chapter)
- Remove the spark plugs using the 16 mm plug wrench [A].
Owner's Tool - Spark Plug Wrench, 16 mm: 92110-1132
- Replace the spark plug with a new one.
Standard Spark Plug
Type: CR9EIA-9
![](https://motoinstruction.ru/img/kawasaki/23/128197.jpg)
- Insert the spark plug [A] vertically into the plug hole with the spark plug installed in the plug wrench [B].
Owner's Tool - Spark Plug Wrench, 16 mm: 92110-1132
Caution: The insulator of the spark plug may break if when the wrench is inclined during tightening.
Tighten:
Torque -Spark Plugs: 15 Nm (1.5 kg·bm, 11 ft·lb)
- Install the stick coils securely.
Be sure the stick coils are installed by pulling up it lightly.
![](https://motoinstruction.ru/img/kawasaki/23/128198.jpg)