Master cylinder — assembly (Kawasaki ZX-6R/ZX-600-J)

0

Before assembly, clean all parts including the master cylinder with brake fluid or alcohol.

Caution! Except for the disc pads and disc, use only disc brake fluid, isopropyl alcohol, or ethyl alcohol for cleaning brake parts. Do not use any other fluid for cleaning these parts, Gasoline, engine oil, or any other petroleum distillate will cause deterioration of the rubber parts. Oil spilled on any part will be difficult to wash off completely, and will eventually deteriorate the rubber used in the disc brake.

Apply brake fluid to the removed parts and to the inner wall of the cylinder.

Take care not to scratch the piston or the inner wall of the cylinder.

Tighten the brake lever pivot bolt and the locknut.

Torque:
Brake Lever Pivot Bolt: 1.0 N·m (0.10 kg·m, 9 in·lb)
Brake Lever Pivot Bolt Locknut: 5.9 N·m (0.60 kg·m, 52 in·lb)

See this article in russian language

Master Brake Cylinder (Front) — Assembly and Installation Suzuki DRZ 250 (1996-2007)
Brembo front brake master cylinder — assembly Triumph Street Triple 765 (2017-2024)
Front Brake Master Cylinder — Disassembly and Assembly Honda CB 400 SF (1992-1999)
Clutch master cylinder and reservoir — removal,… Harley-Davidson V-Rod (2002-2006)
Disassembling the front brake master cylinder Yamaha FZ1 Fazer (2006-2015)

Article about repair motorcycles «Kawasaki ZX-6R ZX600-J» (2000-2002): «Master cylinder — assembly»: https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/chassis/brake/111421 <a href="https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/chassis/brake/111421">Master cylinder — assembly</a> - article about repair motorcycles «Kawasaki ZX-6R ZX600-J» (2000-2002) from section «Brake system». [url=https://motoinstruction.ru/en/Kawasaki/ZX-6R/ZX600J/chassis/brake/111421]Master cylinder — assembly[/url] - article about repair motorcycles «Kawasaki ZX-6R ZX600-J» (2000-2002) from section «Brake system».